Leica Cryostat Cm1850 Service Manual
- The Leica CM1850 may only be operated by trained laboratory personnel. All laboratory personnel designated to operate the instrument must carefully read the present in-struction manual prior to starting work with the instrument. Important Information (5) (Fig.5) 1.3 Designated use The Leica CM1850 is a powerful cryostat for rou.
- Leica CM1850 UV Cryostat Instructions for use Leica CM1850 UV, V1.5, English – 10/2012 Order No. INFORMATION The information, numerical data, notes and value judgments contained in this manual represent the current state of scientific knowledge and stateof-the-art technology as we understand it following thorough investigation in this field.
- Instruction manual. Leica CM1510 S – Cryostat V1.4 English – 04/2010. Always keep this manual near the instrument. Read carefully prior to operating the instrument.
Page 41: General maintenance, Cleaning, disinfection, maintenance
. Enter into a service contract at the end of the warranty period. For further information, please contact your local Leica service center. 55. Clean the instrument every day. Weekly: Before the following parts can be oiled, all section waste and deposits must be carefully removed.
41
Leica CM1850 UV – Cryostat
9.3
Maintenance
9.3.1 General maintenance
The microtome is virtually maintenance-free. To
ensure a smooth operation of the instrument over
several years we recommend the following:
•
Have the instrument inspected by a qualified
service engineer authorized by us once a year.
•
Enter into a service contract at the end of the
warranty period.
For further information, please contact your
local Leica service center.
•
Dreamweaver cs6 serial code. Clean the instrument every day.
Once a week:
•
Apply a drop of oil to the plastic coupling (5,
Fig. 26).
Free onenote 2010. Note: IT professionals should refer to the IT professional resources section.Installation instructionsIf you have Microsoft OneNote 2010, 64-Bit Edition, do one of the following:.
•
Lubricate the specimen cylinder (1):
Push the appropriate coarse feed button to
move the specimen cylinder out to the front
stop position, apply a drop of cryostat oil and
move the specimen cylinder back to the home
position by pressing the appropriate coarse
feed button.
Occasionally, or when required:
•
Lubricate the clamping piece (T-piece) (2) on
the microtome base plate and the clamping
lever (3).
•
Lubricate the slot cover (4).
To do so, turn the handwheel to place the
specimen head to the uppermost position and
apply some drops of cryostat oil on to the slot
cover; after that place the specimen head to
Fig. 23
Fig. 24
1
2
Leica 1860 Cryostat Manual
3
4
9.
Cleaning, disinfection, maintenance
5