Download Ilo Drivers

  
  1. Ilo Client Download
  2. Download Ilo Drivers License
Printable version

iLO 5 Channel Interface Driver for Windows Server 2016

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - System Management
Version:4.3.0.0(26 Jun 2018)
Operating System(s): Microsoft Windows Server 2016
Multi-part download
File name:cp034071.compsig (2.0 KB)
File name:cp034071.exe (732 KB)
The iLO 5 Channel Interface Driver allows software to communicate with the iLO 5 management controller. This driver is used by the Agentless Management Service, firmware flash components, and other utilities.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

cf4dbda4d5dae74ccf944f6c2955f271983e5d188bdba504fdababd41c41fdd1cp034071.exe
38073ca84c0d9cd4a469fd3a4c6a8feddf6d6f01ef63934e71084aeab0d71bb1cp034071.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select 'Install' to start extracting to a temporary location on the hard drive.

Click the 'Install' button to perform the driver installation.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Version:4.5.0.0 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.3.0.0(B) (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.3.0.0 (26 Jun 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

Version:4.1.0.0(B) (5 Feb 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This component no longer installs a null driver on iLO 5 PCI function 0. Support for that function is now provided by the iLO 5 Automatic Server Recovery Driver.


Version:4.1.0.0 (20 Nov 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:4.0.0.0 (12 Jul 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.


Type:Driver - System Management
Version:4.3.0.0(26 Jun 2018)
Operating System(s):
Microsoft Windows Server 2016

Description

The iLO 5 Channel Interface Driver allows software to communicate with the iLO 5 management controller. This driver is used by the Agentless Management Service, firmware flash components, and other utilities.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

cf4dbda4d5dae74ccf944f6c2955f271983e5d188bdba504fdababd41c41fdd1cp034071.exe
38073ca84c0d9cd4a469fd3a4c6a8feddf6d6f01ef63934e71084aeab0d71bb1cp034071.compsig

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select 'Install' to start extracting to a temporary location on the hard drive.

Click the 'Install' button to perform the driver installation.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Revision History

Version:4.5.0.0 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.3.0.0(B) (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Added support for Windows Server 2019
  • Added support for the HPE ProLiant XL270d Gen10 and the HPE ProLiant XL420 Gen10

Version:4.3.0.0 (26 Jun 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Enabled message-signaled interrupts to avoid interrupt sharing with the Universal Serial Bus controller in iLO 5.
  • Added support for the HPE ProLiant DL325 Gen10, HPE ProLiant DL20 Gen10, and HPE ProLiant ML30 Gen10.

Version:4.1.0.0(B) (5 Feb 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This component no longer installs a null driver on iLO 5 PCI function 0. Support for that function is now provided by the iLO 5 Automatic Server Recovery Driver.


Version:4.1.0.0 (20 Nov 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:4.0.0.0 (12 Jul 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.


Sign up to get product updates, drivers and support alerts. Get drivers, firmware and patches here! Product Category: Azure Stack: HPE ProLiant for Microsoft Azure. Ilo monitor drivers - driver download software driver-category list Almost all driver scanners offer a truly large choice of current drivers, and every one of them performs the driver scan rapidly and easily, looking up the effected drivers and getting it the updated versions within a few moments. Includes driver and firmware updates in the interview process. A streamlined 'Manual Install' that includes the necessary drivers specific to your OS installation without you searching the Web. Supports major operating systems. Allows you to easily download Active Health System (AHS) logs, and perform diagnostics.

Ilo Client Download

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Printable version

HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - System Management
Version:3.7.0.0(26 Oct 2012)
Operating System(s):
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Small Business Server 2011 Standard and Essentials
Microsoft Windows HPC Server 2008 R2
File name:cp017930.exe (2.4 MB)
The HP ProLiant iLO 3/4 Channel Interface Driver allows software to communicate with the iLO 3 or iLO 4 management controller. The driver is used by the ProLiant Health Monitor, Insight Management Agents and WBEM Providers, Agentless Management Service, and other utilities.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Add support for Windows Server 2012.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

cp017930.exe3ebe259100397d8527748ddf2ea1ff66

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Place the Smart Component in a temporary directory, then double-click it to run.

Select 'Install' to start extracting to a temporary location on the hard drive.

Click the 'Install' button to perform the driver installation.

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

The Channel Interface Driver was separated into its own component when the ProLiant Support Pack version 9.00 was released. Previously, the driver was a part of the iLO 3 Management Controller Driver Package component.

The Channel Interface Driver was separated into its own component when the ProLiant Support Pack version 9.00 was released. Previously, the driver was a part of the iLO 3 Management Controller Driver Package component.

Version:4.1.0.0 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.0.0.0 (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Aligned system and operating system support with the production Service Pack for ProLiant:

  • Removed support for Windows Server 2008 and Windows Server 2008 R2.
  • Removed support for iLO 3.
  • Removed support for HP ProLiant G7 and HP ProLiant Gen8 systems.

Version:3.31.0.0 (27 Sep 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:3.30.0.0 (24 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Ensure that work items created by the driver are properly terminated if the driver has been restarted.


Version:3.10.0.0(K) (21 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The component executable is now digitally signed with both SHA-1 and SHA-256 signatures.


Version:3.10.0.0 (J) (1 Apr 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Updated to support installation under Windows 8.1 on the HP ProLiant WS460c Gen9.

Can't download realtek audio driver windows 10. (click view, show hidden devices)Did you try steps 2 & 3 here: 10 seems to mean no drivers installed which is clearly wrong.Have you tried the Playing audio troubleshooter?


Version:3.10.0.0(H) (30 Mar 2015)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The component installer has been updated to log additional information in the event of an installation failure.


Version:3.10.0.0 (F) (23 Aug 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Component packaging has been updated; no impact to product’s functionality.


Version:3.10.0.0 (18 Feb 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Ensure the closing '</RIBCL>' tag is returned when the input RIBCL script contains the '<?xmlilo output-format='xml'?>' tag.


Version:3.9.0.0 (10 Sep 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Updated to support new RIBCL processing tags.


Version:3.7.0.0 (26 Oct 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Add support for Windows Server 2012.


Version:3.5.0.0 (4 Jun 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed a problem related to RIBCL 'GET_AHS_STATUS' command.


Version:3.4.0.0 (27 Mar 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Optional for iLO 3. Mandatory for iLO 4.

  • Support for iLO 4 added.
  • The Channel Interface Driver has been separated into its own component, the HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64. Previously, the driver was a part of the iLO 3 Management Controller Driver Package component.

Type:Driver - System Management
Version:3.7.0.0(26 Oct 2012)
Operating System(s):
Microsoft Windows HPC Server 2008 R2
Microsoft Windows Server 2008 Essential Business
Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 Small Business
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Small Business Server 2011 Standard and Essentials

Description

The HP ProLiant iLO 3/4 Channel Interface Driver allows software to communicate with the iLO 3 or iLO 4 management controller. The driver is used by the ProLiant Health Monitor, Insight Management Agents and WBEM Providers, Agentless Management Service, and other utilities.

Enhancements

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Add support for Windows Server 2012.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

cp017930.exe3ebe259100397d8527748ddf2ea1ff66

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Place the Smart Component in a temporary directory, then double-click it to run.

Select 'Install' to start extracting to a temporary location on the hard drive.

Click the 'Install' button to perform the driver installation.

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

The Channel Interface Driver was separated into its own component when the ProLiant Support Pack version 9.00 was released. Previously, the driver was a part of the iLO 3 Management Controller Driver Package component.

Important

The Channel Interface Driver was separated into its own component when the ProLiant Support Pack version 9.00 was released. Previously, the driver was a part of the iLO 3 Management Controller Driver Package component.

Revision History

Version:4.1.0.0 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a potential Windows bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) that could occur if Windows restarts the driver without unloading it.


Version:4.0.0.0 (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Aligned system and operating system support with the production Service Pack for ProLiant:

  • Removed support for Windows Server 2008 and Windows Server 2008 R2.
  • Removed support for iLO 3.
  • Removed support for HP ProLiant G7 and HP ProLiant Gen8 systems.

Version:3.31.0.0 (27 Sep 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Corrected a Windows bugcheck (DPC_WATCHDOG_VIOLATION) that could occur if iLO Remote Console or iLO Virtual Media are in use.


Version:3.30.0.0 (24 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Ensure that work items created by the driver are properly terminated if the driver has been restarted.


Version:3.10.0.0(K) (21 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The component executable is now digitally signed with both SHA-1 and SHA-256 signatures.


Version:3.10.0.0 (J) (1 Apr 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Updated to support installation under Windows 8.1 on the HP ProLiant WS460c Gen9.


Version:3.10.0.0(H) (30 Mar 2015)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The component installer has been updated to log additional information in the event of an installation failure.


Version:3.10.0.0 (F) (23 Aug 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Component packaging has been updated; no impact to product’s functionality.


Version:3.10.0.0 (18 Feb 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Ensure the closing '</RIBCL>' tag is returned when the input RIBCL script contains the '<?xmlilo output-format='xml'?>' tag.


Version:3.9.0.0 (10 Sep 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Updated to support new RIBCL processing tags.


Version:3.7.0.0 (26 Oct 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Add support for Windows Server 2012.


Version:3.5.0.0 (4 Jun 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Fixed a problem related to RIBCL 'GET_AHS_STATUS' command.


Version:3.4.0.0 (27 Mar 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Optional for iLO 3. Mandatory for iLO 4.

  • Support for iLO 4 added.
  • The Channel Interface Driver has been separated into its own component, the HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64. Previously, the driver was a part of the iLO 3 Management Controller Driver Package component.

Ilo

Download Ilo Drivers License

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.